1 Shot Lettering Enamel Paint Black 199L-1/4 Pint

1 Shot Lettering Enamel Paint Black 199L-1/4 Pint Black 199L-1/4 Pint  Alkyd-Resin (oil base) gloss enamels for interior or exterior use on metal, glass, wood, and enamel receptive banners and vinyl, vehicle lettering, pinstriping and graphics. 1 Shot Lettering Enamel Paint has outstanding hiding,durability and fade resistance.  Superior flow characteristics assure the virtual absence of brush marks and provide a clean, sharp edge. 1-Shot Enamels have been used by Sign Professionals for decades. Temperature:   Shot Lettering Enamel Paint Black 199L is best applied between 65 F and 85F. Will not dry below 50 F. Application Method: Brush, Roller, Airbrush or Spray  Thinning: 1 Shot 6000 Series Reducers Recommend. Compatibility: 4001/4002 Tints., 4003 Clear, 4007 Hardener Clean-up:  Brushes: 4004 Brush Cleaner.  Equipment: Mineral spirits  Drying Times:  8 hours and cures in 6–8 weeks Depending on temperature  1-Shot Lettering Enamels no longer contain lead. Some colors do contain toxic pigments. Although they are still not for use by children, the new 1-Shot formulas do not use lead as an opacifier.  If a surface is not thoroughly cleaned, it may contain waxes, oils or silicones that can cause “Fish Eye”.  Make sure to clean with a good surface prep and degreaser.  1Shot Flattening Paste can be used in varying ratios to reduce gloss or create close to a dead flat finish.  Mixing 1 Shot with other types of paints concerns are that the oil-alkyd enamels are not fully compatible with latex or acrylic latex paints. There can be adhesion issues, the products will expand and contract at different rates and when faced with UV exposure, temperature changes and humidity the results can be checking, cracking and premature failure.  FOR USE BY PROFESSIONALS ONLY-NOT INTENDED FOR USE BY CHILDREN  SHIPS VIA UPS GROUND ONLY