ronan clear coatings water based
Ronan Clear Coatings - Water Based
Vinyl Cote
- Vinyl Cote
is a water-based, acrylic clear coating formulated for use as a
protective topcoat on untreated vinyl, painted vinyl signs, vinyl
letters, banners, vinyl awnings, bulletins and many other substrates. It
dries to a flexible, weather resistant finish and exhibits excellent
adhesion to treated and untreated vinyl, wood, metal, glass, plastic and
many synthetics. Properly applied it cures to a "water white",
non-yellowing gloss finish and therefore can be used directly on
pictures, murals, portraits and vinyl graphics without altering the
colors. Vinyl Cote Flat can also be used as a primer for untreated
vinyl. When applied as a primer on untreated vinyl it prevents
plasticizer migration and the adhesion and drying problems caused by
migration. It prepares the vinyl for top coating. Do not use over Gold
Leaf. Non-Flammable, non-toxic when cured, low odor. Available in flat.
- Dry Time:
@ 70 F; 50% Relative Humidity: Dries to touch - 45 minutes to 1 hour;
to handle - 2 1/2 hours; to recoat - 2 1/2 hours. Full cure - 8 hours.
Will take longer to dry under colder or more humid conditions.
- Application Methods: Brush, roller or spray.
Vinyl Cote UV Absorber
- Vinyl Cote UV Absorber
is similar in properties to Vinyl Cote Gloss (see above); but in
addition, is specially formulated to provide extra ultraviolet ray
protection. It is designed for use as a topcoat where resistance to the
effects of exposure to sunlight and weather is a requirement. It helps
prevent color degradation by reducing the harmful effects of ultraviolet
rays, which cause premature fading. It is ideal for use over
fluorescent colors to prolong color retention. Do not use over Gold
Leaf. Can be applied as a protective overcoat on vinyl signs without the
problems associated with solvent based ultraviolet absorber topcoats.
Can be used wherever a water based, non-yellowing, weather and
ultraviolet resistant coating is required. Available in flat, satin or
gloss.
- Dry Time: @ 70 F;
50% Relative Humidity: Dries to touch - 45 minutes to 1 hour; to handle
- 2 1/2 hours; to recoat - 2 1/2 hours. Full cure - 8 hours. Will take
longer to dry under colder or more humid conditions.
- Application Methods: Brush, roller or spray.
Aquathane UV Absorber
- Aquathane UV Absorber
is a high quality single component water based aliphatic urethane
formulated for use as a protective topcoat clear over Graphic Arts work
when resistance to the effects of long-term exposure to sunlight,
weather and chemicals is a requirement. It dries to a durable, flexible
finish that is abrasion, weather, gasoline, chemical and ultraviolet
resistant. Aquathane UV Absorber exhibits excellent adhesion treatment
and untreated vinly, wood, coated metal, plastic and many other
substrates. When properly applied it cures to a "water white",
non-yellowing finish and therefore can be used directly on signs,
murals, portraits and vinyl graphics. It is ideal for floors. Do not use
over Gold Leaf. Non-Flammable, low odor. Avialable in flat, satin, semi
gloss or gloss.
- Dry Time: @
70 F; 50% Relative Humidity: Dries to touch - 1 1/2 hours; to handle: 3
hours; to recoat - 6 hours. Full cure - 5 - 6 days. Will take longer to
dry under colder and/or more humid conditions.
- Application Methods: Brush, roller or spray.
AquaFlx Wood UV Clear
- AquaFlx Wood UV Clear
is an extremely durable, water-based, clear urethane clear coating
formulated for use as a protective topcoat over wood surfaces where
resistance to the effects of long-term exposure to weather and sunlight
is a requirement. It contains both ultraviolet absorbers and hindered
amine light stabilizers for maximum UV light protection. It dries to a
durable, non-yellowing, flexible finish that is abrasion, weather, and
ultraviolet resistant. Formulated for use as an interior or exterior
protective topcoat over wood cabinets, doors, tables, floors and other
wood furnishings. Do not use over Gold Leaf. Non-Flammable, non-toxic
when cured, low odor. Available in flat, satin, semi gloss or gloss.
- Dry
Time: @ 70 F; 50% Relative Humidity: Dries to touch - 30 minutes; to
handle: 1 hour; to re-coat - 2 hour. Full cure - 24 hours. Will take
longer to dry under colder or more humid conditions.
- Application Methods: Brush, roller or spray.
Aqua
Leaf Clear Guard UV
- Aqua
Leaf Clear Guard UV is a durable, water-based, clear Graphic Arts
topcoat specially formulated for use over Aqua Leaf™ when extra
protection is desired on interior surfaces. This UV inhibiting coating
cures to a flexible, washable finish. It helps prevent degradation by
reducing the effects of harmful untraviolet rays which cause premature
fading. It can be used to topcoat murals. Do not use over Gold Leaf.
Non-Flammable, low odor. Available in gloss and satin.
- Dry Time: @ 70
F; 50% Relative Humidity: Dries to touch - 45 minutes to 1 hour; to
handle: 2 1/2 hours; to recoat - 2 1/2 hours; Dry hard - 8 hours. Full
cure - 72 hours. Will take longer to dry under colder and more humid
conditions.
- Application Methods: Brush or roller.
Aqua
Clear Lock UV
- Aqua
Clear Lock UV is an extremely durable, water-based, clear urethane
copolymer Graphic Arts coating. It is formulated for use as a protective
topcoat over computer generated pictorial artwork (ink jet printed,
digital airbrush and electrostatic transfer images) that has been
applied to flexible vinyl. Aqua Clear Lock UV is designed to provide
abrasion, weather and ultraviolet resistance. It prevents color
degradation by reducing the effects of ultraviolet rays and weather. It
can also be used to protect traditional sign and graphic artwork and
paints that have been applied to flexible vinyl and other substrates.
Can be used directly on pictures, wall murals, portraits, and vinyl
graphics. Exhibits excellent adheasion to vinyl, wood, coated metals,
plastics and many other substrates. Do not use over Gold Leaf. Properly
applied it cures to a "water-white", non-yellowing finish. Will not
become tacky from plasticizer migration from vinyl substrates.
Non-Flammable, low odor. Available in matte or gloss.
- Dry Time: @ 70
F; 50% Relative Humidity: Dries to touch - 30 minutes; to handle: 1hour;
to re-coat - 1 hour; Full cure - 8 hours. Will take longer to dry under
colder and more humid conditions.
- Application Methods: Brush, roller or spray.
There are no products to list in this category.