Ronan Clear Coatings - Water Based
Vinyl Cote
- Vinyl Cote is a water-based, acrylic clear coating formulated for use as a protective topcoat on untreated vinyl, painted vinyl signs, vinyl letters, banners, vinyl awnings, bulletins and many other substrates. It dries to a flexible, weather resistant finish and exhibits excellent adhesion to treated and untreated vinyl, wood, metal, glass, plastic and many synthetics. Properly applied it cures to a "water white", non-yellowing gloss finish and therefore can be used directly on pictures, murals, portraits and vinyl graphics without altering the colors. Vinyl Cote Flat can also be used as a primer for untreated vinyl. When applied as a primer on untreated vinyl it prevents plasticizer migration and the adhesion and drying problems caused by migration. It prepares the vinyl for top coating. Do not use over Gold Leaf. Non-Flammable, non-toxic when cured, low odor. Available in flat.
- Dry Time: @ 70 F; 50% Relative Humidity: Dries to touch - 45 minutes to 1 hour; to handle - 2 1/2 hours; to recoat - 2 1/2 hours. Full cure - 8 hours. Will take longer to dry under colder or more humid conditions.
- Application Methods: Brush, roller or spray.
Vinyl Cote UV Absorber
- Vinyl Cote UV Absorber is similar in properties to Vinyl Cote Gloss (see above); but in addition, is specially formulated to provide extra ultraviolet ray protection. It is designed for use as a topcoat where resistance to the effects of exposure to sunlight and weather is a requirement. It helps prevent color degradation by reducing the harmful effects of ultraviolet rays, which cause premature fading. It is ideal for use over fluorescent colors to prolong color retention. Do not use over Gold Leaf. Can be applied as a protective overcoat on vinyl signs without the problems associated with solvent based ultraviolet absorber topcoats. Can be used wherever a water based, non-yellowing, weather and ultraviolet resistant coating is required. Available in flat, satin or gloss.
- Dry Time: @ 70 F; 50% Relative Humidity: Dries to touch - 45 minutes to 1 hour; to handle - 2 1/2 hours; to recoat - 2 1/2 hours. Full cure - 8 hours. Will take longer to dry under colder or more humid conditions.
- Application Methods: Brush, roller or spray.
Aquathane UV Absorber
- Aquathane UV Absorber is a high quality single component water based aliphatic urethane formulated for use as a protective topcoat clear over Graphic Arts work when resistance to the effects of long-term exposure to sunlight, weather and chemicals is a requirement. It dries to a durable, flexible finish that is abrasion, weather, gasoline, chemical and ultraviolet resistant. Aquathane UV Absorber exhibits excellent adhesion treatment and untreated vinly, wood, coated metal, plastic and many other substrates. When properly applied it cures to a "water white", non-yellowing finish and therefore can be used directly on signs, murals, portraits and vinyl graphics. It is ideal for floors. Do not use over Gold Leaf. Non-Flammable, low odor. Avialable in flat, satin, semi gloss or gloss.
- Dry Time: @ 70 F; 50% Relative Humidity: Dries to touch - 1 1/2 hours; to handle: 3 hours; to recoat - 6 hours. Full cure - 5 - 6 days. Will take longer to dry under colder and/or more humid conditions.
- Application Methods: Brush, roller or spray.
AquaFlx Wood UV Clear
- AquaFlx Wood UV Clear is an extremely durable, water-based, clear urethane clear coating formulated for use as a protective topcoat over wood surfaces where resistance to the effects of long-term exposure to weather and sunlight is a requirement. It contains both ultraviolet absorbers and hindered amine light stabilizers for maximum UV light protection. It dries to a durable, non-yellowing, flexible finish that is abrasion, weather, and ultraviolet resistant. Formulated for use as an interior or exterior protective topcoat over wood cabinets, doors, tables, floors and other wood furnishings. Do not use over Gold Leaf. Non-Flammable, non-toxic when cured, low odor. Available in flat, satin, semi gloss or gloss.
- Dry Time: @ 70 F; 50% Relative Humidity: Dries to touch - 30 minutes; to handle: 1 hour; to re-coat - 2 hour. Full cure - 24 hours. Will take longer to dry under colder or more humid conditions.
- Application Methods: Brush, roller or spray.
Aqua Leaf Clear Guard UV
- Aqua Leaf Clear Guard UV is a durable, water-based, clear Graphic Arts topcoat specially formulated for use over Aqua Leaf™ when extra protection is desired on interior surfaces. This UV inhibiting coating cures to a flexible, washable finish. It helps prevent degradation by reducing the effects of harmful untraviolet rays which cause premature fading. It can be used to topcoat murals. Do not use over Gold Leaf. Non-Flammable, low odor. Available in gloss and satin.
- Dry Time: @ 70 F; 50% Relative Humidity: Dries to touch - 45 minutes to 1 hour; to handle: 2 1/2 hours; to recoat - 2 1/2 hours; Dry hard - 8 hours. Full cure - 72 hours. Will take longer to dry under colder and more humid conditions.
- Application Methods: Brush or roller.
Aqua Clear Lock UV
- Aqua
Clear Lock UV is an extremely durable, water-based, clear urethane
copolymer Graphic Arts coating. It is formulated for use as a protective
topcoat over computer generated pictorial artwork (ink jet printed,
digital airbrush and electrostatic transfer images) that has been
applied to flexible vinyl. Aqua Clear Lock UV is designed to provide
abrasion, weather and ultraviolet resistance. It prevents color
degradation by reducing the effects of ultraviolet rays and weather. It
can also be used to protect traditional sign and graphic artwork and
paints that have been applied to flexible vinyl and other substrates.
Can be used directly on pictures, wall murals, portraits, and vinyl
graphics. Exhibits excellent adheasion to vinyl, wood, coated metals,
plastics and many other substrates. Do not use over Gold Leaf. Properly
applied it cures to a "water-white", non-yellowing finish. Will not
become tacky from plasticizer migration from vinyl substrates.
Non-Flammable, low odor. Available in matte or gloss.
- Dry Time: @ 70
F; 50% Relative Humidity: Dries to touch - 30 minutes; to handle: 1hour;
to re-coat - 1 hour; Full cure - 8 hours. Will take longer to dry under
colder and more humid conditions.
- Application Methods: Brush, roller or spray.
There are no products to list in this category.