Screen Printing and Silkscreening

The ErgoMax aluminum-handle squeegee with a 70-durometer blade (8") uses a unique modular design for less fatigue, greater control, and more printing power. The front surface is smooth and flat with recessed screws so nothing snags, and the aluminum handle outlasts wood in solvent-heavy shops. 70 durometer is the neutral, do-everything blade hardness.Modular aluminum handle — less fat..

This 12" x 17" pre-stretched aluminum screen from Nortech Graphics is ready to coat and burn the day it arrives. Choose your mesh count from 25 to 350 tpi to match the job. Plastisol guideline: 24–86 mesh for specialty inks like glitter and puff, 110 for light colors such as white, 160 for black with finer detail, and 200–230 for high-detail work.Pre-stretched aluminum fram..

This 20" x 24" pre-stretched aluminum screen is the workhorse size for garment and graphic shops — big enough for full-front prints, rigid enough to hold high tension. Pick the mesh count your art demands, from coarse 25 tpi for glitter and specialty inks up to 350 tpi for fine halftone detail. Coat, expose, and print.Pre-stretched aluminum frame, 20" x 24" outside dime..

This 23" x 31" pre-stretched aluminum screen gives oversized and poster printers the printable area they need on a frame that stays flat and true. Frames are offered from 25 tpi through 350 tpi. Plastisol guideline: 24–86 for specialty inks, 110 for white and light colors, 160 for black, 200–230 for high detail.Pre-stretched aluminum frame, 23" x 31" outside dimen..

ChromaBlue Emulsion by Chromaline is the SBQ-photopolymer direct emulsion that set the standard for textile screen printers who want faster screen turnaround without sacrificing image quality. With 50% solids it coats smoothly, bridges mesh beautifully, dries fast, and exposes in seconds on LED exposure units — then reclaims easily when the run is done. A true workhorse for plastisol shops. ..

Hydro-X Blue is Chromaline's dual-cure photopolymer emulsion built for shops that run both water-based and plastisol inks on the same screens. At 46% solids it delivers strong stencil build with fast exposure times and LED compatibility, giving you crisp edges and durable stencils that hold up on press and wash out cleanly at reclaim.Dual-cure photopolymer for water-based & plastisol inks 46..

CP2 takes diazo emulsion to another level. Its enormous exposure latitude makes it forgiving for shops still dialing in their exposure times, while reclaiming stays easy run after run. Available in violet or clear with 21.3% solids and medium viscosity, CP2 produces high-resolution, durable — yet reclaimable — stencils. It is freeze/thaw stable, so it ships safely in cold weather.Dia..

The Printers Edge double-bevel Peewee squeegee (90A durometer, single-sided) is the precision blade for tiny print areas — 5mm x 19mm (3/16" x 3/4") in a 12 ft (3.66m) roll. Peewee blades reach where full-size squeegees can't: decals, labels, nameplates, and tight industrial graphics. The 90A double bevel gives a firm, controlled print stroke.90A durometer double-bevel Peewee bla..

The ECO Frame 20" x 24" is a smarter, greener take on the classic aluminum screen — crafted from high-grade, 100% recyclable aluminum. You get the same rigid, high-tension performance as a standard aluminum frame with a smaller environmental footprint, in the popular 20" x 24" size that fits most manual and automatic presses.20" x 24" outside dimensions High-g..

MagnaCure UDC-2 is Chromaline's best-selling dual cure ever — easy to coat, forgiving on exposure, great imaging, durable on press, and easily reclaimed. With 36% solids and medium viscosity it builds hard, durable stencils with excellent definition and line edge. High contrast makes on-press registration easy. Available in blue or clear.Universal dual-cure direct emulsion 36% solids; hard..

McLogan Green Blockout is a medium-viscosity, water-soluble green blockout for filling pinholes and open screen areas the emulsion didn't cover. Made for plastisol and solvent-based inks (not for water-based inks). Apply to the dry, contaminant-free screen, let dry, and print — touch-ups stay put on press and wash out at reclaim.Medium-viscosity water-soluble blockout Fills pinholes and op..

The MasterEdge Peewee 80A double-bevel squeegee — red polyurethane blade, 3/16" x 1" profile, sold as a 12 ft length for precision work. Built for precision graphics, decals, labels, and industrial printing, the double-bevel edge prints cleanly in both directions on small-format jobs.80A durometer red polyurethane double-bevel blade 3/16" x 1" profile; 12 ft length For ..

The patented PMI Split Tape is used by screen printers worldwide to slash reclaim time — instead of peeling tape off frames, the split design lets it release in seconds. Less time fighting tape means more orders through the shop per day. Applies like standard blockout tape and holds firmly on press.Patented split design — dramatically faster reclaim Holds firmly during printing Multi..

Get print-ready fast with this pre-exposed 20" x 24" aluminum screen — the screen burning and film output are included, so you skip the darkroom entirely. Choose your mesh from 110 to 300. Each frame is exposed on an LED vacuum unit for crisp stencil edges, and ships within 3 business days.20" x 24" aluminum frame, pre-exposed and ready to print Mesh counts 110–30..

Get print-ready fast with this pre-exposed 23" x 31" aluminum screen — includes the screen burn and film output, so your art goes straight to press. Choose your mesh count for the job. LED vacuum exposure delivers sharp stencil edges on the large-format frame, and it ships within 3 business days.23" x 31" aluminum frame, pre-exposed and ready to print Your choice of mes..

R Tape blue solvent-resistant blockout tape seals screen edges and open mesh areas against aggressive solvents and inks. The blue blockout tape (36-yard rolls) adheres firmly to mesh and frame, resists curling and bleed-through, and removes cleanly at reclaim. Available in multiple widths.Solvent-resistant blue blockout tape Seals edges and pinholes against aggressive inks 36-yard rolls; multipl..

Jelliff Super Strong monofilament screen mesh, sold by the yard for stretching your own frames. Its high tensile strength permits higher screen tensions while maintaining dimensional stability, with equal elongation of warp and weft, minimum tension loss after stretching, and minimum off-contact — an ideal choice for graphic and UV applications.Super Strong monofilament polyester mesh Sold..

This small wood-handle squeegee with a 60-durometer blade is the softest, most flexible blade McLogan Supply offers — ideal for laying down heavy ink deposits on textiles. The ergonomic small handle (1" thick x 3-3/4" tall) reduces fatigue on long runs. 60 durometer (orange/red blade) bends easily to push ink through open mesh; choose 70 for general work or 80 for fine detail. Cust..

This small wood-handle squeegee with a 70-durometer blade is the all-around neutral choice — firm enough for clean prints, flexible enough for textiles. The ergonomic small handle (1" thick x 3-3/4" tall) improves efficiency while reducing discomfort on repeated strokes. 70 durometer (yellow blade) is the basic, do-everything hardness. Custom cut from 2" to 72".70 durom..

This small wood-handle squeegee with an 80-durometer blade is the firmest of the trio — built for fine detail, halftones, and graphic work where less ink deposit matters. The ergonomic small handle (1" thick x 3-3/4" tall) cuts fatigue and injury risk on repeated pulls. The hard 80-durometer blade shears ink cleanly for crisp edges. Custom cut from 2" to 72".80 duromete..

A 12-foot roll of 60-durometer squeegee blade — the most common blade in graphic and textile screen printing, in the economical long roll. Exceptionally wear- and solvent-resistant for long-life use. Cut your own lengths for wood or aluminum handles, flood bars, or scoop coaters. Precision edge also available for the highest print quality.60 durometer — the industry-standard hardness..

A 4-foot length of 70-durometer squeegee blade — straight edge, single durometer, the neutral hardness most graphic and textile shops reach for. Exceptionally wear- and solvent-resistant for long-life use. Mount it in your wood or aluminum handle, or cut it down for smaller frames. Precision edge also available.70 durometer straight-edge single-durometer blade 4 ft length Wear- and solvent..

A 4-foot length of 80-durometer squeegee blade — the firm straight-edge blade for printers who want minimal ink deposit and maximum edge sharpness. Exceptionally wear- and solvent-resistant for long-life use. A great choice for fine halftones, small type, and UV or high-detail graphic inks.80 durometer straight-edge single-durometer blade 4 ft length Wear- and solvent-resistant polyurethan..

Ulano Extra Heavy Blockout No. 10 is a heavy, non-flammable, water-soluble screen filler with drying characteristics similar to indirect films. Its high viscosity makes handling easy and generally gives effective coverage in a single coating — especially useful on coarse mesh. Thin it for touch-ups.Heavy water-soluble blockout filler Single-coat coverage, even on coarse mesh Non-flammable ..

Water-based ink needs water-resistant stencils, and Ulano 925WR is the industry standard. Its 41% solids content dries fast and coats like a dream. Dyed pale violet for easy stencil visibility, 925WR uses a syrup-based diazo sensitizer and shares the main characteristics of Ulano's TZ emulsions — with higher solids and even better resolution and edge definition.Industry-standard emulsion f..

Ulano Orange is a ready-to-use SBQ-photopolymer direct emulsion formulated for imprinted sportswear printing with plastisol inks. Its masking orange color reduces light scattering — the major cause of lost resolution — so you can hold finer detail, even on less costly white mesh. No diazo mixing, fast exposure, and stencil-making stays simple.Ready-to-use SBQ photopolymer — no ..

Ulano QLT is a ready-to-use, ultra-fast-exposing SBQ-photopolymer emulsion formulated for imprinted sportswear printing. QLT shortens every step of stencil making — coating, drying, and exposure — thanks to its high solids content. You get superior coating properties, faster drying, and crisp stencils in less time.Ultra-fast-exposing SBQ photopolymer High solids for fast coating and ..

Ulano QTX is a ready-to-use, ultra-fast-exposing SBQ-photopolymer direct emulsion built for imprinted sportswear applications running plastisol inks. Its high solids content gives superior coating properties, better bridging of coarse mesh, and fast drying. QTX stencils are extremely durable on long plastisol runs yet reclaim without a fight.Ultra-fast-exposing SBQ photopolymer for plastisol Hig..

Ulano RLX is a multi-purpose, high-speed diazo photopolymer direct emulsion for shops that need one emulsion to do it all. RLX's very high solids content gives better stencil build per coat, excellent bridging of coarse mesh, and faster drying. It coats beautifully, holds up on press, and resists a wide variety of solvent-based and water-based ink systems.Universal dual-cure for solvent- and wat..

White screen printing tape, 2" x 110 yards — the longer roll tapes up double the screens without stopping to reload. Same great performance you expect: seals frame edges and mesh borders against ink migration, adheres well, and removes cleanly at reclaim. Fewer roll changes, uninterrupted productivity.2" wide x 110-yard roll Double the length — tape more screens per roll Se..

White screen printing tape, 3" x 110 yards — extra width for wide frame borders, on the longer roll that tapes up double the screens. Seals frame edges and mesh borders against ink migration with the same reliable adhesion and clean removal, and the 110-yard length means fewer interruptions.3" wide x 110-yard roll Extra width for wide borders Double the length per roll Removes cl..

These 19" x 22" pre-stretched pine wood screens from Nortech Graphics arrive with a lacquer finish, ready to coat and burn. Offered from 25 tpi through 350 tpi. Plastisol guideline: 24–86 for specialty inks, 110 for white and light colors, 160 for black, 200–230 for high detail.Pre-stretched pine wood frame, 19" x 22" outside dimensions Lacquer finish seals the wo..

This full-size wood-handle squeegee with a 60-durometer blade pairs the softest blade with the regular ergonomic handle (1-1/4" thick x 4-3/4" tall) for maximum ink deposit on textiles. Priced per inch and cut to your exact length from 2" to 72" — size it to your image, not your shelf. 60 durometer (orange/red) is the softest, most bendable option.60 durometer — s..

This full-size wood-handle squeegee with a 70-durometer blade is the shop standard — the neutral hardness that handles most textile and graphic jobs. Priced per inch and cut to your exact length from 2" to 72", with the regular ergonomic handle (1-1/4" thick x 4-3/4" tall) that reduces fatigue on long print runs.70 durometer — the all-purpose shop standard Full-si..

This full-size wood-handle squeegee with an 80-durometer blade is the firm choice for graphic printers who need crisp edges and controlled ink deposit. Priced per inch and cut to your exact length from 2" to 72". The hard blade shears cleanly for fine detail, paired with the regular ergonomic wood handle for comfort.80 durometer — firm blade for crisp graphic work Full-size ergon..