Menu
Menu
Your Cart

ronan clear coatings solvent based

ronan clear coatings solvent based

Ronan Clear Coatings Solvent Based

Acrylic Clear Overcoat

  • Acrylic Clear Overcoat is a solvent based, fast drying, acrylic clear topcoat specially formulated to provide long lasting protection to painted surfaces. This coating is designed for use as a topcoat on painted signs and bulletins. Resists yellowing, oxidization, checking and cracking. It is also ideal for renewing faded signs. This coating should not be used on raw wood or any surface, which will come in contact with solvents or harsh cleaning agents (vehicles, motorcycles, windows). Do not use over Gold Leaf. For automotive vehicles and motorcycles use Aquathane Gloss. Do not use Acrylic Clear Overcoat on vinyl signs. For vinyl signs or letters use Vinyl Cote. Ronan Acrylic Clear Overcoat is available in gloss.
  • Dry Time: @ 70 F; 50% Relative Humidity: Dries to touch - 30 minutes to 2 hours; to handle - 2 hours; to re-coat - 48 hours. Full cure - 48 hours. Will take longer to dry under colder or more humid conditions.
  • Application Methods: Brush, roller or spray.

Ron-Glo UV Absorber

  • Ron-Glo UV Absorber is a solvent based, fast drying, acrylic clear topcoat specially formulated to provide ultraviolet ray protection to any painted surface. This UV inhibiting coating is designed for use as a topcoat on painted signs and bulletins where resistance to the effects of long-term exposure to sunlight and weather is a requirement. It helps prevent color degradation by reducing the harmful effects of ultraviolet rays, which cause premature fading. It is ideal for use over fluorescent colors to prolong color retention. Resists yellowing, oxidization, checking and cracking. This coating should not be used on raw wood or any surface, which will come in contact with solvents or harsh cleaning agents (vehicles, motorcycles, windows). Do not use over Gold Leaf. For automotive vehicles and motorcycles use Aquathane UV Gloss. Do not use Ron-Glo UV Absorber on vinyl signs. For vinyl signs use Vinyl Cote UV Absorber. Ron-Glo UV Absorber is available in gloss.
  • Dry Time: @ 70 F; 50% Relative Humidity: Dries to touch - 30 minutes to 2 hours; to handle - 2 hours; to re-coat - 48 hours. Full cure - 48 hours. Will take longer to dry under colder or more humid conditions.
  • Application Methods: Brush, roller or spray.

Sign Finishing Clear

  • Sign Finishing Clear is an excellent medium for creating glazes using Bulletin Colors, Lettering Enamels and Japan Colors. Not recommended for top coating signs. Do not use over Gold Leaf. For top coating signs, better results will be achieved with Acrylic Clear Overcoat or Ronan UV Absorber.
  • Dry Time: @ 70 F; 50% Relative Humidity: Dries to touch - 3 to 4 hours; to handle - 6 to 8 hours; to re-coat - 12 hours. Full cure - 7 days. Will take longer to dry under colder or more humid conditions.
  • Application Methods: Brush, roller or spray.

Important!! Before using clear topcoats, perform a patch test

  1. to test adhesion
  2. to determine if the clear causes any cracking or lifting of the surface coating
  3. to determine that the clear gives the desired finish. (It is especially important to test for clarity over colors).
Read the technical data sheet and material safety data sheet before using any of the products listed below.

There are no products to list in this category.